Warning Indicators - Optoma ZU650 User Manual

aDDITIonal InfoRmaTIon

Warning indicators

lED status indicators
The LED status indicators are located on the rear of the projector. Each LED is defined below.
lED Type lED status
Off
Solid Orange
Light LED
Solid Green
Flashing Red
Off
Off
Solid Green
Status LED
Flashing Green
Flashing Orange
Flashing (alternating)
Green/Orange
Solid Red
Flashing Red
Solid Green
AV Mute
Solid Orange
‡ Power off:
Powering Off...
Press OFF key to Confirm
‡ Light power impact due to high ambient temperature:
The light power will be reduced
due to the high ambient temperature.
‡ DMD life time impact due to high ambient temperature:
Running the projector at high ambient temperature
will impact DMD life time.
Laser diode is off
Laser diode time has expired
Laser diode is on and operating correctly
When projector has lost over 60% initial luminance
AC power is off (without AC plug in)
AC has been applied, projector is in standby mode
note:
Status LED cannot be flashing red, as this is reserved for
an error condition. Status LED is off but keypad LED will indicate
Standby Mode.
Projector is powered up and operating normally
Projector communications
Projector is in cool down mode or startup mode
Projector is in flash update state
Over temperature and projector will automatically shut down
Fan failure and projector will automatically shut down
Light is on - image is displayed
Light is on - image is blank
Projector state
61
English