Using The Projector; Powering On / Off The Projector - Optoma ZU650 User Manual

UsInG THE PRoJECToR

Powering on / off the projector

Powering on
1. Securely connect the power lead and signal/source cable.
2. Set the Power switch to the "ON" position.
3. Turn on the projector by pressing "
The Status LED is Orange with a long blink.
note: The first time the projector is turned on, you will be prompted to select the preferred language, projection
orientation, and other settings.
Powering off
1. Turn off the projector by pressing "
A warning message will appear on the displayed image.
2. Press "
warning message will disappear after 10 seconds. When you press "
press "
3. Set the Power switch to the "OFF" position.
4. Disconnect the power lead from the electrical outlet and the projector.
note:
It is not recommended that the projector is turned on immediately, right after a power off procedure.
20 English
ON
1
4
7
Info
Auto
Menu
Gamma Bright
Lens H
Lens V
Keystone H
Keystone V
Shutter
(AV Mute)
" on the projector keypad or press "
" on the remote control for the second time, the projector will shut down.
OFF
or
2 3
5 6
8 9
0 Mode
Input
Enter
Exit
Cont. PIP
Focus
" on the remote control or pressing "
Zoom
Hot Key Pattern
" on the projector keypad or pressing "
Powering Off...
Press OFF key to Confirm
" on the remote control again to confirm, otherwise the
" on the projector keypad.
" on the remote control.
" on the projector keypad or