Optoma ZU650 User Manual page 50

USING THE PROJECTOR
Power Settings menu
Standby Power Mode
Set the standby power mode setting.
‡ 0.5W mode: The projector is in standby mode when connected to AC power. (<0.5W)
‡ Communication mode: The projector could be controlled via the LAN terminal during power standby.
Direct Power On
Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing "
Auto Power Off
Set the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector.
The projector will automatically power off when the countdown has finished (in minutes). The default setting is 20
minutes.
Sleep Timer
Sets the countdown timer interval. The countdown timer will start, with or without a signal being sent to the
projector. The projector will automatically power off when the countdown has finished.
Notee: The value of sleep timer will be reset to zero after the projector is powered off.
50 English
PICTURE
Standby Power Mode
Direct Power On
Auto Power Off
OUTPUT
Sleep Timer
SETUP
OPTION
" on the remote control or press "
Power Settings
Communication mode
" on the projector keypad.
Off
20 Mins
No