Optoma ZU650 User Manual page 49

UsInG THE PRoJECToR
light source settings
Configure the light source settings. Refer to "Light Source Settings menu" on page 51.
light sensor
‡ light sensor Calibration: Calibrate the Light Sensor for use with the Constant Luminance mode,
which allows the projector to be set for constant brightness. If the Light Sensor has not been
calibrated, Constant Luminance mode will be disabled.
‡ Calibrated:
- Yes: Light Sensor has been calibrated.
- no: Light Sensor has not been calibrated.
Information
Display the projector information for source, resolution, and software version on the screen.
factory Reset
Restore all settings to their default value. It will not reset network.
service
Service only.
49
English