Optoma ZU650 User Manual page 51

USING THE PROJECTOR
Light Source Settings menu
Light Source Mode
Set the light source mode setting. When "Eco Mode" is selected, the projector will adjust to the lowest fan speed
and switch the laser diode power to the minimum setting.
Constant Power Settings
Set the value of the laser diode power (in Watts).
Constant Luminance Settings
Set the value for the Constant Luminance Settings to maintain constant brightness. The light sensor will monitor
the light level and will apply more power as the laser brightness decays naturally over time. When the laser setting
reaches maximum power, it will remain at this setting.
Notee: The light sensor needs to be calibrated for Constant Luminance mode to work properly.
Total Projector Hours
Display the projection time.
PICTURE
Light Source Mode
Constant Power Settings
Constant Luminance Settings
OUTPUT
Total Projector Hours
SETUP
OPTION
Light Source Settings
Constant Power
0
0
11
51
English