UsInG THE PRoJECToR
5.
Click "Properties".
6.
Type in the IP address and Subnet mask, then press "OK".
7.
Press the "Menu" button on the projector.
8.
Select sETUP > Communications > lan.
9.
Enter the following connection parameters:
±
DHCP: Off
±
IP Address: 10.10.10.10
±
Subnet Mask: 255.255.255.255
±
Default Gateway: 0.0.0.0
10.
Press "Enter" to confirm settings.
11.
Open a web browser, for example Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher
installed.
12.
In the Address bar, input the projector's IP address: 10.10.10.10.
45
English