Table of Contents
Advertisement
Analog Audio
A captive screw analog audio connector is provided to ensure a more reliable and secure
connection. The captive screw connector supports balanced and unbalanced audio output.
Balanced audio connections use two signal wires and a ground to minimize interference to an audio
signal over longer cable runs. Unbalanced audio connections use two wires for connection with
consumer audio components.
1 (
)
3 ( - )
2 ( + )
Note: Pin outs may vary, please refer to the audio device's manual to ensure a correct connection.
Important! When terminating cables, please ensure exposed adjacent wires do not touch. This may result in
a short that can damage connected devices.
L
-
+
Important! With unbalanced connections a jumper is needed between ground and negative to reduce noise
atlona.com
XLR
BALANCED
/
R
+
+
-
-
+
-
Tip (+)
Sleeve ( Ground)
UNBALANCED
L
+
-
+
5
RCA
/
R
+
-
+
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Hide quick links:
Advertisement
Table of Contents
