Safety Instructions For Installation - Miele CS 1212-1 Operating And Installation Instructions


The CombiSet must only be installed and connected to the electricity sup-
ply by a suitably qualified and competent person in strict accordance with cur-
rent national and local safety regulations.
Fit the wall units and cooker hood before fitting the CombiSet to avoid dam-
aging it.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.

The CombiSet must not be installed over a fridge, fridge-freezer,
freezer, dishwasher, washing machine, washer-dryer or tumble dryer.

This CombiSet must not be installed above an oven unless it has
a built-in cooling fan.

The electrical cable of the CombiSet must not come into contact
with any moving kitchen component (e.g. a drawer) or be subject to
any mechanical action which could damage it.

Observe carefully the safety clearances listed on the following
pages.
All dimensions are given in mm.

Safety instructions for installation

39