Miele CS 1212-1 Operating And Installation Instructions page 54

Electrical connection
Disconnecting from the mains

Danger of electric shock.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:
Safety fuses
 Completely remove fuses
Automatic circuit breakers
 Press the (red) button until the middle
(black) button springs out.
Built-in circuit breakers
 Circuit breakers, type B or C: switch
the on-off switch from 1 (on) to 0 (off).
Residual current device (RCD)
 Switch the main switch from 1 (on) to
0 (off) or press the test button.
54
Connecting the mains cable

Danger of electric shock.
The mains connection cable must be
fitted by a suitably qualified and
competent person in accordance
with current local and national safety
regulations. (e.g. BS 7671 in the UK).
If the mains cable needs to be replaced
it must be replaced with a special con-
nection cable, type H 05 VV-F (PVC-in-
sulated), available from Miele.
The connection data is quoted on the
data plate.