Advanced Ip Filtering Page - Motorola surfboard SBG901 User Manual

Advanced IP Filtering Page

This page allows you to define which local PCs will be denied access to the SBG901
WAN. You can configure IP address filters to block Internet traffic to specific network
devices on the LAN by entering starting and ending IP address ranges. Note that you
only need to enter the LSB (Least-significant byte) of the IP address; the upper bytes of
the IP address are set automatically from the SBG901 Configuration Manager's IP
address.
The Enabled option allows you to store filter settings commonly used but not have them
active.
Field
Start Address
End Address
Enabled
When done, click Apply to activate and save your settings.
6 • Advanced Pages
Field Descriptions for the Advanced IP Filtering Page
Description
Enter the starting IP address range of the computers for which you
want to deny access to the SBG901 WAN. Be sure to only enter
the least significant byte of the IP address.
Enter the ending IP address range of the computers you want to
deny access to the SBG901 WAN. Be sure to only enter the least
significant byte of the IP address.
Activates the IP address filter, when selected.
Checkmark Enabled for each range of IP addresses you want to
deny access to the SBG901 WAN.
B
44