6.6 Installing the Floppy Disk Drive
1.
Place the FDD into position on the keyboard base. Make sure the FDD is underneath the
catch hook on the keyboard base.
2.
Secure the FDD to the keyboard base with the four (M2.5x4) screws (Figure 6-7).
NOTE: Be sure to use only M2.5x4 screws for securing the FDD. Any other screw size
will permanently damage the FDD.
M2.5x4
screws
3.
Reconnect the FDD cable to PJ4 on the system board.
Figure 6-7 Securing the four FDD screws
FDD
M2.5x4
screws
6-11