Disc Operation In Dvd±R, Dvd-Rw Disc - Sanyo DVR-DX600 Instruction Manual

Disc Operation in DVD±R, DVD-RW disc
For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu.
The DVD±R, DVD-RW Disc Menu allows you to rename your disc or finalize it so it will be compatible with most
other DVD players.
At first, go to Disc Operation mode.
1
Press [SETUP]. The Setup menu appears.
2
While 'Disc Oper' is selected, press [ENTER] to go to the Disc Operation page.
Finalize (DVD±R, DVD-RW)
Finalizing a DVD±R, DVD-RW 'locks' its recordings in place so the disc
can be played on most standard DVD players or computers equipped
with DVD-ROM drives.
3
Use [.../†] to select 'Finalize' menu.
4
If you want to finalize the whole disc, press [ENTER].
5
To confirm, select 'OK'. To cancel, select 'Cancel'.
If you select 'OK' and press [ENTER], the disc will be finalized.
• Once you have finalized a DVD±R, DVD-RW disc, you cannot edit or record anything else on that disc.
• It may take over 7 minutes for finalizing the edited disk, you'd better wait till the set finish the finalizing operation.
• 'Finalize' can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc, and the
number of titles on the disc.
Disc Operation
Erase
Finalize
Protect
Disc Operation
Make Comp
...† Select
Adapt
ENTER OK
Disc Info
DISC Exit
_ Exit
Finalize
Finalize this disc?
OK Cancel
45