Dvd Playback - Sanyo DVR-DX600 Instruction Manual

DVD Playback

DVD Playback
Playing a DVD/VCD
1
Press [OPEN/CLOSE] to open the disc tray.
2
Load your disc in the tray with the playback side down (label side up).
3
Press [OPEN/CLOSE] to close the tray.
4
'LOAD' appears on the front panel display, and playback starts automatically. If playback does not start,
press [PLAY (√)]. In some cases, the Disc menu might appear instead.
Playing a DVD+R (+RW, -R, -RW)
When a DVD+RW or unfinalized DVD+R (-R, -RW)is inserted, no title is played automatically but the current TV
channel displays on the screen.
1
If you want to play a title on the DVD+R (+RW, -R, -RW), you must press
[MENU] or [PLAY] to display the disc menu of a thumbnail index for each
recorded title on the disc.
The index picture screen of the title will be displayed. Also title
information (name of recording, recorded day, time, recording quality)
will be displayed.
2
Select a title to play using [ ...†œ √ ] then press [ENTER] or [PLAY].
If a Disc menu is displayed
• A Disc menu may be displayed when you load a DVD. Use the [œ √...†] buttons to select the title/chapter you
want to view, then press [PLAY] or [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.
• If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must
be entered and/or the disc must be authorized; see 'Set Parental Level' on page 25.
• The DVD Recorder will not play discs with Region codes different from the DVD Recorder. The Region code for
this DVD Recorder is 4 (four).
• Unless stated otherwise, all operations described below use the remote control. Some features may also be
available in the Setup menu.
• A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.
• A disc which is recorded with unauthorized movie material may not be played.
• A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.
30