Initial Installation - Sanyo DVR-DX600 Instruction Manual

Initial Installation

Initial Installation
Initial Installation
After successfully connecting your DVD Recorder to your TV and other devices, this chapter will show you how
to complete the initial installation.
You must follow the initial installation process to set the time, date, channels, and language preferences for the DVD
Recorder. If you can't see the initial installation screen with the first power on, follow 'Re-installation' on page 16.
1
'Initial Setup Wizard' is displayed on the screen. Make sure the RF cable from
your antenna or cable TV jack is connected. Press [ENTER] to begin initial
installation.
2
'OSD Lang' message is displayed on the screen. Select the desired language
for the on screen menu using [.../†]. Press [ENTER] to confirm.
3
'Country Setting' message is displayed on the screen. Select the desired
country using [.../†]. Press [ENTER] to confirm.
4
'Auto Scan' message is displayed on the screen. The DVD Recorder detects
channels automatically and stores them in memory.
5
'Clock Set' message is displayed on the screen.
Set the clock.
Use [œ/√] to move left/right and use [.../†] to change the settings.
After setting the clock, press [ENTER] to confirm. If you cancel the process
during Initial Installation, you should repeat this procedure.
6
'Adjust channels' message is displayed on the screen. Press [ENTER] to
confirm.
Initial Setup Wizard 1/7
Before using your recorder
Please complete this setup
Next
OK
ENTER
OSD Lang 2/7
√ English
Spanish
French
Back
Choose OK
...†
ENTER
Country Setting 3/7
√ Australia
Belgium
Denmark
Back
Choose OK
...†
ENTER
Auto Scan 4/7
Antenna
5 CHs found
Back Cancel
œ √ Choose OK
ENTER
Clock Setting 5/7
...
1 / 1 / 2010 00 : 00
†
Back
Choose OK
...†
ENTER
Adjust channels 6/7
NO. NAME ...
OK
PR1 BBC
Cancel
PR2 P-02
PR3 P-03
Back
†
œ √ Choose OK
ENTER
15