Disc Editing In Dvd±R, Dvd-Rw Disc - Sanyo HVR-DX700 Instruction Manual

DG-M13-23E1D-HR-O(GB) 2006.7.14 3:59 PM
Change Disc Name
You can rename your disc to any name you choose.
The default disc name is 'MY DVD'.
4
Use [œ/√] to select 'Change Disc Name'. Press
[ENTER] as shown on the screen.
5
The Keyboard Menu appears.
6
Use [œ √...†] to select and press [ENTER] to
enter the name of the disc.
CLR : Clear the disc name / SP : Space / DEL :
Delete a character / SAVE : Save the disc name
7
Press [ENTER] again.
8
To save the name of the disc, select 'SAVE' and
press [ENTER].
If 'Lock Disc' is set to 'On' in the DISC Settings
menu, you cannot rename your disc; see page 52.
Change Disc Name
Press [Enter] to change
the disc name.
Change Disc Name
MY DVD
CLR SP
1 2 3 4 5 6 7 8 9 0
A B C D E F G H I J
Instructions:
K L M N O P Q R S T
Enter-Confirm
U V W X Y Z ( ) . ,
: ; &
Enter-Confirm Move ...†
˘ ` 53
DEL SAVE
Change Disc Name
Problem.
This disc is locked. It
cannot be renamed.
ok
Instructions:
Enter-Confirm Move ...†
mac001 1200DPI 100LPI
Disc Editing in DVD±R, DVD-RW disc
Finalise
Finalising a DVD±R (or DVD-RW) 'locks' its
recordings in place so the disc can be played on
most standard DVD players or computers equipped
with DVD-ROM drives.
4
Use [œ/√] to select 'Finalise Disc' for a DVD±R
(or DVD-RW). Press [ENTER] as shown on the
screen.
5
Select 'Yes' using [...] and press [ENTER] to
finalise the disc.
6
Press [ENTER] again.
7
Press [SETUP] to go to the top disc menu.
Finalise Disc Finalise Disc
Press [Enter] if you want to
No changes can be made
finalise the disc.
afterwards. Continue?
Yes
No
Instructions:
Instructions:
Enter-Confirm Move ...†
Enter-Confirm
Once you have finalised a DVD±R (or DVD-RW) disc,
you cannot edit or record anything else on that disc.
Disc Manager
53