Preferences' / Video Settings - Sanyo DVR-DX600 Instruction Manual

'Preferences' / Video Settings

1
Press [SETUP]. The Setup menu appears.
While 'Init Setup' is selected, press [ENTER] to go to the initial setup
page.
2
Use [œ/√] to select 'Preferences
3
While 'Preferences
4
Press [√]. The 'Video' submenu is displayed.
TV Aspect Ratio
1
Use [.../†] to select 'TV Aspect' while the 'Video' submenu is
displayed.
2
Press [√] to go to the second level.
3
Use [.../†] to select the desired TV Aspect.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
4:3 PS :
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both
sides of the picture are cut off.
4:3 LB :
Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and
below the picture.
16:9 :
Select when a 16:9 wide screen TV is connected.
Video Output
Progressive Scan Video provides the highest picture quality with reduced
flickering.
Interlace or Progressive :
television (DTV) or Monitor using the COMPONENT jacks, set Video Output
to 'Interlace' or 'Progressive'.
Caution
Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV or
monitor.
'.
' is selected, press [†] to select 'Video'.
If you connect the DVD Recorder to a digital
Initial Setup
Preferences
•Video TV Aspect
Audio Video Output
Parental Ctrl
Auto Settings
... Choose ENTER OK
œ √
†
Preferences
Video • TV Aspect
Audio Video Output
Parental Ctrl
Auto Settings
...
œ √ Choose ENTER OK
†
Preferences
Video TV Aspect
Audio • Video Output
Parental Ctrl
Auto Settings
...
Choose ENTER OK
œ √
†
LB
Interlace
SETUP Exit
4:3 PS
4:3 LB
16:9
SETUP Exit
Interlace
Progressive
RGB
SETUP Exit
23