Basic Recording; Recording From Tv - Sanyo DVR-DX600 Instruction Manual

Basic Recording

Basic Recording

Recording from TV

Follow the instructions below to record a TV program.
1
Turn on the DVD Recorder and load a recordable disc.
Make sure your TV input is set to view the DVD Recorder.
2
Set the desired Recording mode by pressing [REC MODE] repeatedly.
HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SEP (Super
Long Play - 8 hrs/disc).
3
If your DVD Recorder does not show a TV program, press [INPUT] on the remote control. Use [PR +/–] to select
the TV channel you wish to record.
4
Press [AUDIO] to select the audio channel to record (Stereo, BIL, or Mono).
The table below shows what audio channel will be recorded with different settings and different types of
broadcasts.
The last column (Monitor Audio) shows what you will hear during recording. For example, if the TV
broadcast is in Stereo, then setting the DVD Recorder to Stereo will record the broadcast in Stereo, and the
Monitor Audio will also be in Stereo.
TV Broadcast Selected Audio
MONO
STEREO
BIL
5
Press [REC ( )] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see One Touch Record on the next page.
6
Press [STOP ( )] to stop recording.
• The maximum number of DVD titles per disc is 49. If the DVD Recorder is powered off during DVD recording, the
recording will not be saved.
• If a DVD+RW or unfinalized DVD+R (-R, -RW) disc is inserted in the tray, no title is played automatically after
loading is finished.
• If you are recording to a blank DVD+R (+RW, -R, -RW) disc, it may take up to 7 minutes for initial processing after
disc loading. Also, it may take up to 5 minutes for post processing after recording.
Broadcast Audio
L Ch
MONO MONO
STEREO L
MONO MONO
BIL I BIL I
BIL II BIL II
Monitor
R Ch Audio
MONO MONO
R STEREO
MONO MONO
BIL I BIL I
BIL II BIL II
37