Preferences / Video Settings - Sanyo HVR-DX700 Instruction Manual

DG-M13-23E1D-HR-O(GB) 2006.7.14 3:59 PM

PREFERENCES / Video Settings

1
Press [SETUP].
2
Use [œ/√] to select 'Preferences'.
3
While 'Preferences' is selected, press [†] to
select 'Video'.
4
Press [ENTER]. The 'Video' submenu is
displayed.
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move ...†
TV Aspect Ratio
1
Use [.../†] to select 'TV Aspect' while the
'Video' submenu is displayed.
2
Press [ENTER] or [√] to go to the second level.
3
Use [.../†] to select the desired 'TV Aspect'.
Video
TV Aspect
Video Output
Instructions:
Enter-Confirm Setup-Exit Move ...†
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
4:3 LB :
Select when a standard 4:3 TV is
connected. Displays theatrical images with masking
bars above and below the picture.
4:3 PS :
Select when a standard 4:3 TV is
connected. Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
16:9 :
Select when a 16:9 wide screen TV is
connected.
24
˘ ` 24 mac001
Auto :
automatically.
Video Output
Progressive Scan Video provides the highest picture
quality with reduced flickering.
Interlace or Progressive :
HDD/DVD Recorder to a digital television (DTV) or
Monitor using the COMPONENT jacks, set Video
Output to 'Interlace' or 'Progressive'.
RGB :
Follow the same procedure as 'TV Aspect Ratio' to
change the 'Video Output'.
N/A
Auto
Select Picture
Interlace
Format
4:3 LB
4:3 PS
16:9
Auto
1200DPI 100LPI
Convert to the appropriate aspect ratio
If you connect the
Not available
Video
TV Aspect Auto
Video Output Interlace
Select Video
Output
Interlace
Progressive
Instructions:
RGB
Enter-Confirm Setup-Exit Move ...†
Caution
• Once the Progressive Scan setting is entered,
an image will only be visible on a Progressive
Scan compatible TV or monitor. Press and
hold [P.SCAN] for 5 seconds to return to
Interlace Scan mode.
Setup menu