Safety Instructions - Hilti SF 2-A Operating Instructions Manual

5 Safety instructions

NOTE
The safety rules in section 5.1 contain all general safety rules for electric
tools which, in accordance with the applicable standards, must be listed in
the operating instructions. Accordingly, some of the rules listed may not be
relevant to this tool.
5.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and instructions.
warnings and instructions may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for future reference. The
term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
5.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
Printed: 24.03.2014 | Doc-Nr: PUB / 5174908 / 000 / 00
Failure to follow the
en
7