Bayer HealthCare Contour Next EZ User Manual page 4

Your Meter Display
The picture below shows all the symbols that appear
on your meter display. To view, with the meter off, press
and hold ▲ or ▼. All display segments will appear
for 10 seconds. If you need more than 10 seconds to
check the display, press and hold ▲ or ▼ again.
While all characters are displayed, it is very
important to verify that
there are missing segments, see Error Codes and
Symbols (page 41). This may affect the way you see
your results.
®
2
is fully displayed. If
Icon What it Means
Top area on the display presenting date and time.
Pre-meal result marker.
Post-meal result marker.
Identifies a Logbook entry.
Indicates a reminder has been set.
Center area on the display that shows either
your test result or any error codes.
The meter is ready to test.
Control solution result marker.
Indicates it is too cold or too hot for your meter
to test accurately.
Indicates Average.
Results are displayed as mmol/L. The 7 appears
when viewing 7 day HI–LO summary.
Day/month format.
The batteries are low and need to be changed,
and will remain on display until batteries are
changed.
Appear if the meter is in 12 hour setup.
Indicates sound is turned on.
3