Communication Interface - KStar GP800 User Manual

Communication interface

8 Communication interface
8.1 The great mass of computer system have equipped UPS to avoid system
failure and datum damage due to utility power fault, you can monitor
and control the power status through the connection between the
communication interface and UPS.
8.2 You can get UPS status through the connection between computer and
RS232 communication interface on back panel of UPS. User can
connect UPS to the computer and know the running status of UPS at
any moment through the computer interface, software and OS such as
DOS, WINDOWS3.1, WINDOWS95, WINDOWS/NT, NOVELL, etc.
when utility power disconnected, system can know that utility fault and
send out alarm information. When the reserved time goes, UPS will
automatically save files and close system normal, and then
automatically shutdown UPS power. When utility power come back,
UPS will automatically run and system can automatically also come
back to operate.
8.3 The computer interface of UPS offer detailed datum and is suit to net
route, workstation, monitoring system, PC, etc.
Computer interface:
It can sostenuto transmit datum through RS232 communication series
port and computer. The datum that UPS offers includes input voltage
value, output voltage value, output frequency, input frequency, battery
capacity percent, used load percent, UPS internal temperature, etc.
- 32 -
GP800 UPS