Table of Contents
Advertisement
NetSure
™
9500 120kW 400V DC Power System
Operation Manual, UM584001200 (Issue AA, April 14, 2014)
distribution leads are terminated in a 2-hole lug and the
DC input bus leads are terminated in a single-hole lug.
Note also that the positive leads are red and the negative
leads are black. Torque these connections to 62 in-lbs (7
Nm).
6.
Place the replacement circuit breaker into its mounting
position, feeding the attached leads to the rear of the
distribution panel. Orient the ON/OFF positions as shown
in
Figure
2.
Spec. No: 584001200
Model No: 9500
7.
Replace the distribution panel's top or bottom front
cover. Secure the cover to the distribution panel.
8.
Place each circuit breaker to the OFF position.
9.
Connect all power sources to the distribution panel.
10. Place each circuit breaker to the ON position.
11. Ensure that there are no local or remote alarms active on
the system.
[8 of 13]
Code: UM584001200
Issue AA, April 14, 2014
Advertisement
Table of Contents
