Table of Contents
Advertisement
6.4.9
Rebuilding a RAID set
The rebuild option is available only for RAID 1 and RAID 10 sets.
To rebuild a RAID set:
1.
From the main menu, select the RAID set you want to rebuild, then press
<Enter>.
2.
Press <R>.
While rebuilding the array, you can press <Esc> to stop. A pop-up menu
appears for confirmation. Select Yes to stop rebuilding and return to the main
menu.
A Build/Rebuild Completed message appears on screen to indicate that
you have successfully rebuilt the array.
3.
Press any key to return to the main menu.
ASUS TS300-E3/PA4 & PS4
6-49
Advertisement
Table of Contents
