6.
Select the stripe size from the menu,
then press <Enter>.
For server systems, we recommend that you use a lower array block size. For
multimedia computer systems used mainly for audio and video editing, we
recommend a higher array block size for optimum performance.
7.
When prompted, use the keyboard to assign a name for the RAID 10 set,
then press <Enter>.
8.
If you want to make the array
bootable, select Yes from the menu,
then press <Enter>.
9.
When prompted to create the RAID
10 set, select <Yes>, then press
<Enter>.
The utility erases all data from the selected hard disk drives. Make sure to
backup all important data before creating a RAID set.
A Build Complete message
appears to indicate that you have
successfully created the RAID 10
set.
ASUS TS300-E3/PA4 & PS4
6-43