Table of Contents
Advertisement
3.
Lift the load lever in the direction of
the arrow to a 135º angle.
4.
Lift the load plate with your thumb
and forefinger to a 100º angle (A),
then push the PnP cap from the load
plate window to remove (B).
5.
Position the CPU over
the socket, making sure
that the gold triangle is
on the bottom-left corner
of the socket. The socket
alignment key should fit
into the CPU notch.
2-6
Load plate
Alignment key
Gold triangle mark
B
A
Chapter 2: Hardware setup
Advertisement
Table of Contents
