Table of Contents
Advertisement
3.
When prompted, press the <SpaceBar> to select Yes from the Consistency
Check dialog box, then press <Enter>. You may also press <F10> to check
the drive consistency.
A progress bar appears on screen.
4.
While checking the disk consistency, press <Esc> to display the following
options.
Stop
•
Continue - Continues the consistency check.
•
Abort
•
5.
When checking is complete, press any key to continue.
6-26
- Stops the consistency check. The utility stores the
percentage of disk checked, When you restart checking, it
continues from the last percentage completed rather than
from zero percent.
- Aborts the consistency check. When you restart checking, it
continues from zero percent.
Chapter 6: RAID configuration
Advertisement
Table of Contents
