Table of Contents
Advertisement
SCSI backplane jumper settings and HDD ID assignments
The 6-pin jumper J1 on each of the SCSI backplanes allows you to define your
desired SCSI configuration.
The picture below shows the location of jumper J1 with pins 1-3 and 2-4 shorted.
Refer to the following tables for the jumper settings and the appropriate ID# for
each SCSI HDD bay.
ASUS TS300-E3/PA4 & PS4
J1 setting
(1-3 shorted, 2-4 shorted)
Device
Drive Bay 1
Drive Bay 2
Drive Bay 3
Drive Bay 4
GEM SAF-TE
SCSI ID#
ID0
ID1
ID2
ID3
ID15 (SCSI channel-0)
2-29
Advertisement
Table of Contents
