Panning And Tilting With Zonal Mode Ptz Control; Zoom - Honeywell Rapid Eye Common Operations Manual

Using Cameras that Pan, Tilt and Zoom

Panning and Tilting with Zonal Mode PTZ Control

White
octagon
icon

Zoom

8
To Pan or Tilt. Move the mouse pointer onto the video in a PTZ camera window. The pointer
changes to a numbered arrow icon. Nudge the mouse in the direction that you need to
move the camera. The number next to the arrow indicates how much panning/tilting will
occur when you click the mouse button. For continuous panning or tilting, click the arrow
that is furthest from the center.
To stop continuous panning/tilting, move the mouse until the pointer changes to a white
octagon, then click the mouse button.
See Switching Between Zonal and Pull PTZ Control
for your PTZ camera instead of zonal.
Zoom. To zoom in, move the mouse pointer onto a PTZ camera window and roll the mouse
wheel forward. To zoom out, roll the wheel backwards, towards your hand.
Note There is also a Dartboard control for PTZ cameras. Use of that control is
explained in the
Move the mouse until
the icon points in the
direction you want to
move, then click the
mouse button.
on page
Roll the mouse wheel
forwards and backwards
to zoom in and out.
Rapid Eye Remote View Operator
7 if you want to use pull control
Guide, 800-02324V1.