Assembly Instructions - Yardworks 60-3023-4 Owner's Manual

Installing and removing the battery
IMPORTANT!
The battery pack is not charged when it is purchased. Before using the trimmer for the first time, charge
the battery. See Charging Procedure (Fig. 4) for further instructions.
To Remove
1. Press in and hold the latch buttons (1) on both sides of the battery pack.
2. Grasp the trigger handle (2) firmly. Pull the battery pack out of the handle.
NOTE:
The battery pack fits snugly into the handle to prevent accidental dislodging. It may require a strong pull
to remove.
To Install
1. Align the tongue (3) of the battery pack with the cavity in the handle housing.
2. Grasp the trigger handle (2) firmly.
3. Push the battery pack into the handle until both sides lock. The latch buttons will click when they lock.
4. Do not use force when inserting the battery pack. It should slide into place and click.

ASSEMBLY INSTRUCTIONS

2
9
1
3
Fig. 1