Configuring Relevant Attributes Of The Isp Domain - 3Com 400 Family Configuration Manual

Configuring Relevant
Attributes of the ISP
Domain
Table 201 Creating/Deleting an ISP Domain
Operation
Create ISP domain or enter the view
of a specified domain.
Remove a specified ISP domain
Enable the default ISP domain
specified by isp-name
Restore the default ISP domain to
"system"
By default, a domain named "system" has been created in the system. Its
attributes are all default values.
The relevant attributes of ISP domain include the AAA scheme, domain state,
maximum number of users, the idle-cut function, the accounting optional option,
the messenger alert and self-service server URL.
Perform the following configurations in ISP Domain View.
Configuring AAA Scheme
The AAA schemes includes:
RADIUS scheme — you can implement authentication, authorization, and
■
accounting by referencing the RADIUS server group. The adopted RADIUS
scheme is the one used by all the users in the ISP domain. For detailed
information of the commands of setting RADIUS scheme, refer to the following
Configuring RADIUS section of this chapter.
Local authentication — if you use the local scheme, you can only implement
■
authentication and authorization at local without RADIUS server.
None — no authentication and accounting.
■
Table 202 Configuring AAA Scheme Adopted by the ISP Domain
Operation
Configure an AAA scheme for the domain. scheme { radius-scheme
Configure a RADIUS scheme
Restore the default AAA scheme.
By default, after an ISP domain is created, the default AAA scheme is
cannot use a RADIUS scheme together with the
You can use either
scheme
scheme for an ISP domain. If both of these two commands are used, the latest
configuration will take effect.
Configuring ISP Domain State
Every ISP has active/block states. If an ISP domain is in active state, the users in it
can request for network service, while in block state, its users cannot request for
any network service, which will not affect the users already online.
AAA and RADIUS Protocol Configuration
Command
domain isp_name
undo domain isp_name
domain default enable isp_name
domain default disable
Command
radius_scheme_name | local | none }
radius-scheme radius_scheme_name
undo scheme { radius-scheme
radius_scheme_name | none }
local
or command to specify the RADIUS
radius-scheme
195
. You
local
or scheme.
none