Displaying And Debugging Of Voice Vlan; Voice Vlan Configuration Example - 3Com 400 Family Configuration Manual

64 C 3: VLAN O
HAPTER PERATION
Displaying and
Debugging of Voice
VLAN
Voice VLAN
Configuration Example
Perform the following configuration in System View.
Table 64 Configuring the Aging Time of Voice VLAN
Operation
Set the aging time of Voice VLAN
Restore the default aging time
The default aging time is 1440 minutes.
After completing the above configuration, enter the
view to view the configuration and running state of Voice VLAN.
Table 65 Displaying Voice VLAN
Operation
Display the status of Voice VLAN
Display the OUI address supported by the current
system
Networking Requirements
Create VLAN 2 as the Voice VLAN in manual mode and enable its security mode. It
is required to set the aging time to 100 minutes, the OUI address to
0011-2200-0000, and configure the port Ethernet1/0/2 as the IP Phone access
port. The type of IP Phone is untagged.
Network Diagram
Figure 16 Voice VLAN Configuration
Switch Switch
VLAN 2 VLAN 2
Ethernet1/0/2 Ethernet1/0/2
Telephone Telephone
Configuration Steps
[4500]vlan 2
[4500-vlan2]port ethernet1/0/2
[4500-vlan2]interface ethernet1/0/2
[4500-Ethernet1/0/2]voice vlan enable
command
voice vlan aging minutes
undo voice vlan aging
display
Command
display voice vlan status
display voice vlan oui
command in any