Advertisement
Button 12 are for program input 12, 3 is to monitor
DVI3 input, and 4 for VGA3 input, 5 for DVI4 INPUT, 6
for VGA4 input.
Seamless switch with effect
Step 6- Setting save and loading
In the user profile, there are three
buttons to set parameters, click on
parameter setting, SAVE to keep
figurations saved, a list would pop up,
there are 10 user modes for selection,
anyone could be chosen; update reset
to updating the program, after
upgarde, restart the device.
There are 10 user modes in Switch Mode, click
on the button to load saved settings.
Step 7- Software and device sync
When operations were done
both on front panel buttons
and PC software, the device is
not synchronized with PC
software, click the sync button
on the upper right corner to
make them synchronized
Operations on the front panel buttons
NOTE
and PC software are not allowed to be
done at the simultaneously.
Factory Reset:When there
is wrong operation during
parameter adjustment,
users can recall the device
and readjust the parameter.
Following the steps: Press
Control option in the menu bar, and click
the submenu Reset to initiate factory reset.
VSP 5162 Quick Start
Rev 1.0
Page 4 of 4
Advertisement
