Advertisement
www.aeroplusrc.com
9. Mount the engines ignition to the motor box on radio foam to reduce vibvrations.
Radio Gear
1. On each side of the fuselage near the canopy bolts are areas for switches to be mounted.
2. A convenient place to mount the RX is just in front of the rudder servo. Ensure that it is
mounted on Velcro or radio foam and securely strapped down.
Canopy Attachment
3. The canopy is held in place with the 4 screws, ensure these are tight before flying
AeroPlus RC Copyright 2013 © All Rights Reserved
service@aeroplusrc.com
Advertisement
