Table of Contents
Advertisement
SPECIAL (CONT.)
MOTION
- ALARM:
VIEW TYPE: When motion is detected, select from the following display options:
1. OFF - do not display motion alarm
2. ALL - Show all motion zones when motion alarm is detected.
3. BLOCK - show the area where motion is detected as a solid block.
4. OUTLINE - Show the area where motion is detected as an outline only.
OSD VIEW: If enabled, ALARM will appear on the screen when motion is detected.
ALARM OUT: The camera supports 3.3V alarm output. When motion is detected,
an alarm output can be triggered if enabled.
TIME: Set the dwell time after motion is detected. Values are in seconds.
21
Advertisement
Table of Contents
