Table of Contents
Advertisement
BACKLIGHT
BLC
BACK LIGHT COMPENSATION
If BLC is selected, adjust the size nad position of the mask:
- Level: Set the BLC levels LOW / MIDDLE / HIGH
- AREA: Use the joystick controller on the camera's board to adjust the zone's position. Press the
enter key and use the joystick controller to adjust the zone's size.
- DEFAULT: Return the BLC settings to their original default values.
HME
HIGHLIGHT MASKING EXPOSURE
HME allows objects to appear clearly on the screen by masking extremely bright areas.
- SELECT: The camera supports up to four (4) different HME zones. Select which zone to setup.
- DISPLAY: For the selected zone, select ON to adjust its position and size. Use the joystick
controller on the camera's board to adjust the zone's position. Press the enter key and use the joystick
controller to adjust the zone's size.
- BLACK MASK: Select whether the HME mask will display in black on the camera's view.
- LEVEL: Set the working range of the HME. The higher the
value, the HME mask will appear only around bright sources.
Set the value from 0 ~ 100. Default value is 20.
- MODE: Select whether the HME mask will appear during night
mode only or all day. If the zone is set to night mode, the zone
will appear based on the AGC setting value.
- DEFAULT: Return the settings to their original default values.
15
Advertisement
Table of Contents
