Table of Contents
Advertisement
DAY & NIGHT
AUTO /
Day/ Night switch is based on the CDS levels (IR models) or AGC levels (non-IR
models).
COLOR / The camera always stays in day/color mode.
B&W/
The camera always stays in night/B&W mode.
EXT
The camera's Day & Night settings are set according to an external IR LED board.
AUTO
For cameras with no IR LED Built-in:
- D -> N Threshold (AGC): Set when the camera switches from day to night mode by the
AGC value. When the camera detects AGC levels beyond the set threshold, it
will switch from color to B/W.
- D -> N Delay (AGC): Set a delay for the camera when switching from day to night mode.
- N -> D Threshold (AGC): Set when the camera switches from night to day mode by the
AGC value. When the camera detects AGC levels beyond the set threshold, it
will switch from B/W to color.
- N -> D Delay (AGC): Set a delay for the camera when switching from night to day mode.
For cameras with IR LED Built-in:
- D -> N Threshold (CDS): Set when the camera switches from day to night mode. The lower
the value, the camera will require less light (more darkness) to switch to Night Mode.
- D -> N Delay (CDS): Set a delay for the camera when switching from day to night mode.
- N -> D Threshold (CDS): Set when the camera switches from night to day mode. The lower
the value, the camera will require less light (more darkness) to switch to Night Mode.
- N -> D Delay (CDS): Set a delay for the camera when switching from night to day mode.
- EXT LED: AUTO: The LEDs are enabled/ disabled by the CDS Sensor on the LED Board.
OFF: The camera's LEDs are disabled manually.
17
Advertisement
Table of Contents
