Miele KM 88-2 Operating Instructions Manual page 17

Installation instructions
2 zone Combiset
1 Combiset
2 Combisets
3 Combisets
4 Combisets
5 Combisets
4 zone Combiset
1 Combiset
2 Combisets
3 Combisets
Combination
One 2 zone
+ one 4 zone
Two 2 zone
+ one 4 zone
Three 2 zone
+ one 4 zone
One 2 zone
+ two 4 zone
Two 2 zone
+ two 4 zone
Extractor (e.g. DA 8-2)
Place the provided seal
edge of the grill.
Depth Width *
in (= Dimen-
inch sion B)
in inch
19-5/16" 10-7/16"
19-5/16" 22"
19-5/16" 33-1/2"
19-5/16" 45-1/32"
19-5/16" 56-9/16"
19-5/16" 22"
19-5/16" 45"
19-5/16" 68"
19-5/16" 33-1/2"
19-5/16" 45"
19-5/16" 56-9/16"
19-5/16" 56-1/2"
19-5/16" 68-1/16"
f
under the
Installation instructions
loosen
b
Appliance
c
Tensioning screw
d
Clamp
e
Countertop
f
Seal
Turn the tensioning screws
counter clockwise until a resistance
is felt, then turn the clamps
left.
Place the appliance in position, turn
the clamps and tighten the tension-
ing screws until the clamps press
into the countertop
Install the stainless steel lid, EA 80 (if
applicable). It is supplied with its
own installation instructions.
Connect the appliance to the electri-
cal supply.
When installing several Combiset units,
a stainless steel spacer bar must be
placed between the units. It is supplied
with its own installation instructions.
tighten
c
d
to the
e
, as shown.
17