Miele CS 1212 Operating And Installation Instructions page 26

Frequently asked questions
What if the combiset turns itself off automatically?
Possible fault
Either the "Safety cut-out" feature or the
"Overheating protection" feature has
been activated.
What if one of the following errors occurs:
- The booster function turns off automatically ahead of time.
- C and 0 flash alternately in the display.
- H is shown in the display.
Possible fault
The overheating protection feature has
been activated.
The food does not cook when using the Auto-heat function.
Possible fault
Large amounts of food are being
cooked.
The pot or pan does not transfer the
heat properly.
The cooling fan continues to run after the combiset is turned off.
Possible fault
This is not a fault.
26
Solution
See "Overheating protection" or "Safety
cut-out".
Solution
See "Overheating protection".
Solution
Select a higher continued power level
or begin cooking at the highest level
and turn the power back by hand.
Use the correct pots and pans, see
"Cookware".
Solution
The fan continues to run until the
appliance has cooled sufficiently. It will
turn off automatically.