Cut Out - Miele CS 1212 Operating And Installation Instructions

Installation

Cut out

^ Make the worktop cut-out for one or
more appliances as applicable.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the right or left of the
appliance(s).
See also "SAFETY INSTRUCTIONS
FOR INSTALLATION".
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
36
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius, maximum
be carefully filed down to fit.
3
/ " (4 mm), can
16