Related Manuals for Hitachi Koki DS18DVC
Summary of Contents for Hitachi Koki DS18DVC
- Page 1 Cordless Driver Drill DS 14DVC DS 18DVC • DS18DVC Read through carefully and understand these instructions before use. Handling Instructions...
- Page 2 & &...
- Page 3 English Symbols WARNING 1 14.4 V Rechargeable battery (For DS14DVC) The following show 2 18 V Rechargeable battery (For DS18DVC) symbols used for the machine. Be sure that you 3 Latch understand their meaning 4 Pull out before use. 5 Insert Read all safety warnings and all instructions.
-
Page 4: General Power Tool Safety Warnings
(Original instructions) c) Prevent unintentional starting. Ensure the GENERAL POWER TOOL SAFETY WARNINGS switch is in the off -position before connecting to power source and/or battery pack, picking WARNING up or carrying the tool. Read all safety warnings and all instructions. Carrying power tools with your fi... -
Page 5: Specifications
If the sleeve is not tight, the bit may slip or fall out, causing injury. SPECIFICATIONS POWER TOOL Model DS14DVC DS18DVC No-load speed (Low/High) 0 – 450 / 0 – 1250 min 0 – 450 / 0 – 1250 min –1 –1... -
Page 6: Battery Removal/Installation
1. Battery (BCC1412) Table 2. (For DS14DVC) 2. Battery (BCC1812) Table 2 Charging time (At 20°C) (For DS18DVC) Optional accessories are subject to change without notice. Charger UC18YK UC18YGH Battery APPLICATIONS BCC1412, BCC1812 Approx. -
Page 7: Prior To Operation
(2) Regarding the temperature of the rechargeable CAUTION battery. ○ The clutch dial cannot be set between the numerals “1, The temperatures for rechargeable batteries are as 3, 5 ... 22” or the dots. shown in the table below, and batteries that have ○... -
Page 8: Maintenance And Inspection
1 – 22 screws. screws. For 8 mm or smaller nominal For 4.8 mm or smaller nominal Driving diameter screws. (DS18DVC) diameter screws. (DS18DVC) Wood screw 1 – For 6.2 mm or smaller nominal For 3.8 mm or smaller nominal diameter screws. - Page 9 4. Storage Store the driver drill in a place in which the temperature is less than 40°C and out of reach of children. 5. Service parts list CAUTION Repair, modifi cation and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center.
- Page 11 Hitachi Power Tools Norway AS Kjeller Vest 7 Postboks 124, 2007 Kjeller, Norway Tel: (+47) 6692 6600 Fax: (+47) 6692 6650 URL: http://www.markt.no Hitachi Power Tools Sweden AB Rotebergsvagen 2B SE-192 78 Sollentuna, Sweden Tel: (+46) 8 598 999 00 Fax: (+46) 8 598 999 40 URL: http://www.markt.se Hitachi Power Tools Denmark AS...
- Page 12 EN60745, EN60335, EN55014 and EN61000 in accordance with Directives 2004/108/EC, 2006/95/EC and 2006/42/ The European Standards Manager at Hitachi Koki Europe Ltd. is authorized to compile the technical fi le. This declaration is applicable to the product affi xed CE marking.