Installation - Omcan SG101 Instruction Manual

Installation

PACKAGING DISPOSAL
The components of the packaging are urban solid waste; therefore they can be easily disposed. If the machine
has to be installed in countries where specific regulations are in force, packaging must be disposed in
compliance with them.
SETTING UP OF THE MACHINE
The machine must be installed on a work table suitable for the grills overall dimensions as shown. It must be
adequately large, level, dry, smooth, resistant, stable and at a height of 80 cm from the ground. The machine
must be installed in a room with a maximum of 75% humidity and a temperature between +5°C and +35°C.
ELECTRICAL CONNECTIONS
The machine is equipped with a power supply cord. To connect the machine, follow the indication of the rating
plate. Check that unit is grounded. Check that the features on the rating plate correspond to the features
shown in the consignment
and delivery note, and that the
disconnecting plug and the socket
are easy to reach when the
machine is functioning.
a)
d)
c)
b)
e) f)
6
Fig. 2:
Unpacking
components
Fig. 3: Rating
Plate