Pack Contents - Valor Fires 953 Installer And Owner Manual

INSTALLER GUIDE

4. PACK CONTENTS

The items required for this appliance are packed in sections.
Section 1 - Fire unit contains:
1 Convection box and burner assembly
1 Loose parts pack including: -
1 Grommet for rear of convection box
1 Strip of floor sealing tape
1 Flue restrictor
4 Fibre plugs
4 Woodscrews
2 Fire retaining cables
2 Cable adjusters
2 Eyebolts
1 Length of self-adhesive foam seal
1 Inlet "T" connector including pressure test point, nut and olive for 8mm inlet pipe.
1 Burner tray trim.
1 Control position label for Dream and Eternal.
1 Battery
1 Ceramic fuel effect pack (Not shown)
2 No.8 x 3/8 screws (Black) for securing the flue restrictor.
2 No.8 x 3/8 screws (Black) for securing the fascia.
4 No.8 x 3/8 screws (Black) for securing the Dream hood.
3 No.8 x 3/8 screws (Black) for securing the Obsession outlet baffle.
1 Knurled screw for slider linkage.
2 M5 x 10 countersunk screws for securing the slider control to the Dream fascia.
4 M4 x 10 screws for securing the infill trims to the Dream fascia.
Section 2 - Fire front contains
1 Firefront casting
1 Front cover casting.
1 Fascia
1 Set of infill trims (Dream model)
1 Slider control (Dream model)
1 Hood (Dream model)
1 Outlet baffle (Obsession)
Remove all the items carefully to prevent damage. Take special care when handling
the ceramic components. Some items may be contained in the packaging fitments -
Examine the packaging carefully before discarding. Check that all the items are
present and undamaged.
Page 18
©
Baxi Heating U.K. Limited 2010.