Internal Connections - Follett HCC1000AHS Installation Instructions Manual

Connect louvered docking assembly to icemaker.
• Plug must be accessible after fi nal installation.
• HCE1400A/W 230/50/1) requires a 20 amp circuit (4.00 mm
Air-cooled icemakers – follow steps 7.1 through 7.4.
7.1
Ice transport tube
➋
• Slide icemaker into louvered docking
➊
assembly
• Insert ice transport tube all the way into
coupling and tighten nut firmly
7.3
Power cord
• Remove twist tie
• Carefully pass plug thru opening and
plug into wall outlet
HARMONY • SATELLITE-FILL
CAUTION
2
➊
➋
self-contained

Internal connections

wire)
7.2
Potable water and drain lines
• Insert potable water line into valve
• Push drain line over hose barb on
back of evaporator mount
7.4
Power cord
• Position plate into opening and secure
with supplied screw
7
➊
➋
➊
➋
➊
➋
15