Internal Connections - Follett Horizon Elite Chewblet HCD1010RMS Installation Instructions Manual

Connect docking assembly to ice machine.
6.1
Ice transport tube installation
➋
• Slide ice machine into docking assembly
ensuring that drain tube is fully seated on
barbed drain fitting
• Insert ice transport tube all the way into
coupling and tighten nut firmly
6.3
Refrigeration lines
➊
• Evacuate line set.
• Connect self-sealing liquid and suction
line fittings ➊
10
➊
➊
➋

Internal connections

6.2
Water solenoid, shut-off valve,
and potable water line options
If water solenoid is already mounted to
evaporator:
• Insert potable water line into shut-off valve.
If this is an undercounter installation:
• Mount water solenoid atop evaporator and
locate the shut-off valve inside the machine.
Insert potable water line into shut-off valve.
If water solenoid is not mounted and
machine will not be installed under-
counter:
• Mount water solenoid to inside rear (upper
right corner) of docking assembly using one
screw.
• Insert potable water line into shut-off valve -
locate the shut-off valve outside the machine.
•
Insert outgoing line from shut-off valve into
push-in connection of water solenoid.
6.4
Power cord
• Remove twist tie
• Carefully pass cord through opening and
plug into wall outlet
remote condensing
6
ICE MANAGER