Optical drive connector board
Description
Optical drive connector board
Before removing the optical drive connector board, follow these steps:
1.
2.
3.
4.
5.
Remove the optical drive connector board:
Downloaded from
www.Manualslib.com
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
Remove the battery (see
Battery on page
Remove the following:
a.
Hard drive (see
Hard drive on page
b.
Optical drive (see
Optical drive on page
c.
Keyboard (see
Keyboard on page
d.
Switch cover (see
Switch cover on page
e.
Fan (see
Fan on page
f.
Heat sink (see
Heat sink on page
g.
Display assembly (see
h.
Top cover (see
Top cover on page
i.
ExpressCard board (see
j.
Audio board (see
Audio board on page
k.
Speaker (see
Speaker on page
l.
Rear cover (see
Rear cover on page
m. SIM connector board (see
n.
System board (see
System board on page
manuals search engine
47).
53)
56)
61)
66)
68)
69)
Display assembly on page
81)
ExpressCard board on page
85)
88)
92)
SIM connector board on page
97)
Spare part number
487121-001
75)
84)
94)
Component replacement procedures 101