Restoring Factory Settings In Computer Setup - HP Compaq 6735b Maintenance And Service Manual

2.
3.
To exit Computer Setup menus, choose one of the following methods:
●
●
Your changes go into effect when the computer restarts.

Restoring factory settings in Computer Setup

NOTE:
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
2.
3.
4.
5.
Your changes go into effect when the computer restarts.
104 Chapter 5 Computer Setup
Downloaded from www.Manualslib.com
NOTE: You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
keyboard to navigate and make selections in Computer Setup.
● To select a menu or a menu item, use the keyboard arrow keys and then press enter, or use
a pointing device to click the item.
● To scroll up and down, click the plus sign (+) or the minus sign (-) in the upper-right corner of
the screen.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc, and
then follow the on-screen instructions.
Press f10 to enter BIOS Setup.
Select the File, Security, Diagnostics, or System Configuration menu.
To exit Computer Setup menus without saving your changes, click Exit in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Ignore changes and exit, and then press enter.
– or –
To save your changes and exit Computer Setup menus, click Save in the lower-left corner of the
screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Restoring defaults will not change the hard drive mode.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
Press f10 to enter BIOS Setup.
Use a pointing device or the arrow keys to select File > Restore defaults.
Follow the on-screen instructions.
To save your changes and exit, click Save in the lower-left corner of the screen, and then follow
the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
manuals search engine
esc while the "Press the ESC key for Startup Menu"