Optical drive
NOTE:
Description
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive
DVD/CD-RW Combo Drive
DVD-ROM Drive
Before removing the optical drive, follow these steps:
1.
2.
3.
4.
Remove the optical drive:
1.
2.
3.
4.
5.
6.
56
Chapter 4 Removal and replacement procedures
Downloaded from
www.Manualslib.com
All optical drive spare part kits include an optical drive bezel.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Remove the battery (see
Battery on page
Position the computer with the right side toward you.
Loosen the Phillips PM2.5×9.0 captive screw (1) that secures the optical drive to the computer.
Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the
tab to the left to release the optical drive from the computer.
Remove the optical drive (3) from the computer.
If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward
you.
Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical
drive.
manuals search engine
47).
Spare part number
486262-001
486263-001
486264-001