Page 1
DX80G2M6S-PB2 Gateway’s DIP switch-based mapping. Node Model Gateway Model DX80N2X6S-PB2 DX80G2M6S-PB2 Step 1: Set the Gateway’s DIP Switches In the example network shown, the Node and Gateway are a mapped pair. To configure this I/O mapping, set the Gateway’s DIP switch 2 and switch 8 ON.
Page 2
Quick Start Guide for -PB2 Point-to-Point Networks Step 3: Bind the Node to the Gateway 45.72 [1.8”] 30.48 Binding Nodes to their Gateway ensures the Nodes only exchange data with the Gateway [1.2”] they are bound to. To create your network, bind the Nodes to the Gateway and assign them a unique Node address.