Keys, Doors, and Windows
On Solid : Vehicle is secured
during the delay to arm the system.
Fast Flash : Vehicle is unsecured.
A door, the hood, or the liftgate
Slow Flash : Alarm system is
Arming the Alarm System
1. Turn off the vehicle.
2. Lock the vehicle in one of
Use the RKE transmitter.
With a door open, press the
3. After 30 seconds the alarm
system will arm, and the
indicator light will begin to
slowly flash indicating the
alarm system is operating.
on the RKE
transmitter a second time will
bypass the 30-second delay
and immediately arm the alarm
The vehicle alarm system will not
arm if the doors are locked with
If the driver door is opened without
first unlocking with the RKE
transmitter, the horn will chirp and
the lights will flash to indicate
pre-alarm. If the vehicle is not
started, or the door is not unlocked
on the RKE
transmitter during the 10-second
pre-alarm, the alarm will be
If a door, the hood, or the liftgate is
opened without first disarming the
system, the turn signals will flash
and the horn will sound for about
30 seconds. The alarm system will
then re-arm to monitor for the next
Disarming the Alarm System
To disarm the alarm system or turn
off the alarm if it has been activated:
on the RKE transmitter.
Start the vehicle.
To avoid setting off the alarm by
Lock the vehicle after all
occupants have left the vehicle
and all doors are closed.
Always unlock a door with the
Unlocking the driver door with the
key will not disarm the system or
turn off the alarm.
How to Detect a Tamper
is pressed on the RKE
transmitter and the horn chirps and
the lights flash three times, an alarm
occurred previously while the alarm
system was armed.
If the alarm has been activated, a
message will appear on the DIC.
See Security Messages 0 118.
See Radio Frequency Statement