Universal Remote System; Performance And Maintenance; Traction Control/Electronic; Stability Control - GMC Terrain Denail Manual

Universal Remote System

If equipped, these buttons are in the
overhead console. The system can
replace up to three remote control
transmitters used to activate
devices such as garage door
openers, security systems, and
home automation devices.
Read the instructions completely
before attempting to program the
Universal Remote system. Because
of the steps involved, it may be
helpful to have another person
available to assist with programming
the Universal Remote system.
See Universal Remote System
0 126.
Performance and
Maintenance
Traction Control/
Electronic Stability
Control
The traction control system limits
wheel spin. The system is on when
the vehicle is started.
The StabiliTrak system assists with
directional control of the vehicle in
difficult driving conditions. The
system is on when the vehicle is
started.
To turn off traction control, press
and release on the
i
console. illuminates and the
appropriate DIC message
displays. See Ride Control
System Messages 0 117.
Press and release
turn traction control back on.
To turn off both Traction Control
and StabiliTrak, press and
i
hold until and
and the appropriate DIC
message displays. See Ride
Control System Messages
0 117.
Press
systems.
See Traction Control/Electronic

Stability Control 0 170.

Tire Pressure Monitor

This vehicle may have a Tire
Pressure Monitor System (TPMS).
The low tire pressure warning light
alerts to a significant loss in
pressure of one of the vehicle's
tires. If the warning light comes on,
again to
stop as soon as possible and inflate
the tires to the recommended
pressure shown on the Tire and
Loading Information label.
illuminate
In Brief 21
again to turn on both